Beta test channel · v1.5.0 Beta 17

Install Bambu Poop Conveyor

This beta installer remains open through flashing, Wi-Fi setup, and verification. Connect the ESP32 to this computer with a data-capable USB cable.

Beta channel: this build is staged beside the public firmware for testing. Existing devices should use their Update tab to preserve saved settings; a clean USB installation can erase configuration.
1Connect and installThe browser flashes the complete v1.5.0 Beta 17 image.
2Join your Wi-FiEnter network details when the installer asks—there is normally no need to leave this page.
3Open and verifyThe ESP32 returns its local control-center address when it is online.
Use current Chrome or Edge on a desktop computer, or Chrome on Android. Web Serial is unavailable in Safari and Firefox. For browser security, open this installer from its HTTPS address.

After flashing: Wi-Fi setup

The installer normally asks for Wi-Fi details and returns the device address automatically. If that step is skipped or does not appear:

  1. Wait up to one minute after the ESP32 restarts. If the setup network does not appear, power-cycle the ESP32 once.
  2. Connect your computer or phone to:
Wi-Fi network: BambuConveyor
Wi-Fi password: 12345678
BambuConveyor network selected in Wi-Fi settings
  1. If the configuration page does not open automatically, visit 192.168.4.1.
  2. Enter the Wi-Fi and Bambu printer settings, then select Save settings.
  3. Allow the ESP32 to reboot and reconnect to the configured Wi-Fi network.
Installing requires this HTTPS page, but the finished ESP32 control center is local HTTP. Existing beta devices can install the latest build from their own Update tab. Looking for the public installer? Open the stable channel.