Bambu Poop Conveyor ESP32 Flasher

Please verify you are using Chrome or Microsoft Edge before starting.

If it fails to download manifefst, make sure you use FULL URL (https://t0nyz.com/flasher/index.html)

After Flashing Instructions:

The latest version introduces AP Mode, making configuration easier. After flashing, follow these steps:

  1. Power off and on your ESP32.
  2. Wait 1 minute for the device to start the Wi-Fi network.
  3. Connect your computer/phone to:

    4. Wi-Fi Network: BambuConveyor
    Wi-Fi Password: 12345678

    BambuConveyor Wi-Fi
  4. If the configuration page doesn't appear, open a browser and go to 192.168.4.1/config.
  5. Enter all your settings, including Bambu printer details.
  6. Click Save, and the ESP32 will reboot into the configured Wi-Fi network.